Pillar Mounted Jib Crane
| Model: | BZ |
| Design standard: | ISO |
| Lifting Capacity: | 1t-16t |
| Span: | 3-12m |
| Lifting Height: | 3-10m |
| Working Class: | M3 |
| Control Mode: | Pendant control or remote control |
Product introduction
Pillar Jib Crane is widely used in machining workshop, product storage and dispatch warehouse, plastic injection molds changing, finished steel product industries, especially in the production lines, column mounted jib crane a type of crane that uses a mounted arm to lift, move and lower material. The jib crane installed and fixed on ground. The arm, mounted either perpendicular to or an acute angle upwards from a column(pillar), may rotate along its central axis through a limited arc or a full circle. This kind of jib crane is composed by column, beam, rotation structure , electric hoist and fixing parts, etc.
Electric System:
1Power supply through step less slide lines
2Lifting mechanisms and traveling mechanisms are mutually independent and could travel at the same time.
3Control panel protection degree is IP54.
4Reasonable components installation, convenient for check and maintenance.
5Electric cable is suspended in cable saddle, stationary cable trolley which slides on a galvanized C-type steel.
Main features
-
box-type shaped by wielding.
01
-
High quality carbon steel Q235B and Q345B.
02
-
the girder connected by high strength screws.
03
-
Welding seams are tested by X-ray and ultrasound.
04
-
Compact structure, small volume and light weight trolley.
05
-
Lifting mechanism is open type winch trolley.
06
-
Compact reducer motor drive, step less control, hardened gears and safety disc brake.
07
-
Good operation performance, step less speed regulating and running smoothly.
08
-
Main girders Shot blasting sa2.5 after welding to release internal stresses.Painting high quality epoxy zinc-rich primer, and the thickness of oil film is 140μm.
09
Our advantages
1Free Standing column mounted on concrete foundation, erection and assembly and operation easily.
2Pillar Jib Crane can rotate 360, 270 and 180 degree, matched with electric wire rope hoist or electric chain hoist.
3Take up small space, easy installation and operation, simple structure, it is a perfect handling equipment used in small workshop.
4Customized design for clients:Customized design according to the workshop or column size to satisfy clients’ different demand. Clients also can choose their favorite color for the jib crane.
Technical Parameter of Pillar mounted jib crane
| Capacity | t | 0.5 | 1 | 2 | 3 | 5 |
| Span | S(m) | 3~6 | 3~6 | 3~6 | 3~6 | 3~6 |
| Lifting height | m | 3~6 | 3~6 | 3~6 | 3~6 | 3~6 |
| Lifting speed | m/min | 8 | 8 | 8 | 8 | 8 |
| Trolley speed | m/min | 20 | 20 | 20 | 20 | 20 |
| Turning speed | m/min | 0.5/manual | 0.5/manual | 0.5/manual | 0.5/manual | 0.5/manual |
| Work duty | A3 | A3 | A3 | A3 | A3 |
Inquiry
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.
