European Style Overhead Crane
| Model: | HD/NLH |
| Design Standard: | FEM,DIN |
| Lifting Capacity: | 1t-63t |
| Span: | 7.5-28.5m |
| Lifting Height: | 6-24m |
| Working Duty: | FEM 2M |
| Control Mode: | pendant control, remote control |
Product introduction
European Style Overhead Crane is designed and manufactured in accordance with FEM Europe standard, and equipped with high performance ABM or SEW brand engines, Schneider brand inverters and electrical components, variable speeds, box girder design, low headroom monorail hoist. Low noise, free maintenance, light weight, good-looking, most popular among new construction plant or workshops. According to lifting capacity and structure, its types have European Single Girder Overhead Crane and European Double Girder Overhead Crane.
Technical Description:
1This type crane have features of European optimization design, light dead weight, small wheel load, and short size.
2Good driving capacity, double lifting speed, frequency control of trolley and crane, smooth and stable traveling and a variety of patterns meet customers' needs.
Main features
-
European style single girder overhead crane has the features of small dimension, light dead weight, minimum limiting distance from hook to wall, lower headroom and higher lifting height, etc.
01
-
Firstly, European overhead crane could provide more effective working space than traditional crane does.
02
-
Also, European overhead crane requires smaller workplace and has more functions.
03
-
Thirdly, the wheel pressure of European crane is much smaller than the traditional one because of light dead weight.
04
-
Lastly and most importantly, European crane could save a substantial amount of money, spent on initial construction investment, long term heating fee, air conditioning and other maintenance fee
05
-
All in all, European style single girder overhead crane is a good choice for your material handling.
06
Our advantages
1Single main girder, welding box structure, camber meeting national standard.
2Steel plate material Q235 or Q345B ( similar with foreign steel plate Fe3 or Fe52).
3Main welds joint adopts union melt welding, nondestructive inspection. After welding, main girder is through shot blasting treatment, gets Sa2.5 class, and eliminate welding stress.
4Reasonable layout, simple maintenance and insulation class IP55 for electric control box Flat cable, galvanized track and cable pulley for trolley traveling power supply, smooth traveling.
5The trolley and crane adopt three-trinity driving mechanism, frequency stepless speed regulating, hard-tooth surface, disc brake.
6Crane driving IP55, F class insulation, contact continuity reaches 40% ED. Epoxy zin-rich paint, a long service life, beautiful outlook and lustre.
-
Main Girder -
End Carriage -
Electric Monorail Hoist -
Electric Control Box -
Lifting Motor -
Wheel -
Hook -
Remote Control
Technical Data
| Lifting Capacity | t | 3.2 | 5 | 10 | 12.5 | 16 |
| Span | S(m) | 7.5~28.5 | 7.5~28.5 | 7.5~28.5 | 7.5~28.5 | 7.5~28.5 |
| Lifting height | m | 6~24 | 6~24 | 6~24 | 6~24 | 6~24 |
| Lifting speed | m/min | 0.8/5 | 0.8/5 | 0.8/5 | 0.6/4 | 0.6/4 |
| Trolley speed | m/min | 2~20 | 2~20 | 2~20 | 2~20 | 2~20 |
| Crane speed | m/min | 3~30 | 3~30 | 3~30 | 3~30 | 3~30 |
| Work duty | A5 | A5 | A5 | A5 | A5 | |
| Track type | P24 | P24/P38 | P38 | P38/P43 | P43 |
Inquiry
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.
